The Frigidaire IM115 Next Generation Ice-Maker Kit is designed for Frigidaire top-freezer refrigerator models built in 2003 to present with the condenser coil on the back of the refrigerator. This kit allows you to add ice-making capabilities to all freezers that accept an icemaker. It will also fit selected side-by-side refrigerators that do not have a water dispenser in the freezer door.
Product Features
Make cubes of ice directly from your freezer
Use with Frigidaire models that were built in 2003 to present
Fits top mount refrigerators and side-by-side refrigerators without freezer-door water dispenser
Compatible with 14.5 through 18.6/20.8 cu. ft. refrigerators
Works with Sears/Kenmoor After some research it appeared this unit works with the Sear 253 model series. All the refrigerator connectors, plugs, and throughholes and screw holes are as described and fit exactly this ice maker. The instructions were reasonably detailed and accurate and it took about 1 hour to install. It comes with all the parts needed to mount to the refrigerator but does not come with the kit to connect to the cold water tap. There is a small bracket with a slotted hole to adjust the level of the…
Easy install, need to buy kit to attach to water supply I’m thrilled I finally bought this ice maker and can’t believe it took me a decade to do so. Installation was easy. Hardest part was deciphering exactly where the leveling screw went. I finally decided, correctly, that I needed to use the self threading machine screw to screw it into one of the holes in the bottom of the ice maker. It wasn’t hard but I wanted to make sure I didn’t put it in the wrong spot and wind up damaging the ice maker.I didn’t realize that I would need to…
It works … but not well or consistently. Install was easy enough – maybe 30 minutes – but it’s not working as well as it should. Plenty of water pressure (95psi) and solid copper 1/4 inch line to the valve. Valve and line to ice maker flushed prior to install as well. After 4 days of trouble shooting have zeroed in on a very picky water vale. Does not cycle consistently. Resistance on valve tests within range (270 ohms) but everything leads me back to a bad valve. It happens and it’s impossible to tell sometimes without replacing it…
hOmeLabs Beverage Refrigerator and Cooler – Mini Fridge with Glass Door for Soda Beer or Wine – 120 Cans Capacity – Small Drink Dispenser Machine for Office or Bar with Adjustable Removable Shelves
LG LT700p refrigerator water filter fits – LG refrigerator water filter ADQ36006101 – ADQ36006102 – Kenmore refrigerator water filter 9690 – nsf lg fridge water filter replacement cartridge
Mueller 10-in-1 Pro Series 19 Program 6Q Pressure Cooker with German ThermaV Tech, Cook 2 Dishes at Once, BONUS Tempered Glass Lid incl, Saute, Steamer, Slow, Rice, Yogurt, Cake, Maker, Sterilizer
W10295370A Water Filter, Replacement for Whirlpool Water Filter, Refrigerator Water Filter 1, EDR1RXD1, P4RFWB, Kenmore 46-9081, Kenmore 46-9930, by MT PURITY (1 Pack)
Loading...
Works with Sears/Kenmoor After some research it appeared this unit works with the Sear 253 model series. All the refrigerator connectors, plugs, and throughholes and screw holes are as described and fit exactly this ice maker. The instructions were reasonably detailed and accurate and it took about 1 hour to install. It comes with all the parts needed to mount to the refrigerator but does not come with the kit to connect to the cold water tap. There is a small bracket with a slotted hole to adjust the level of the…
Easy install, need to buy kit to attach to water supply I’m thrilled I finally bought this ice maker and can’t believe it took me a decade to do so. Installation was easy. Hardest part was deciphering exactly where the leveling screw went. I finally decided, correctly, that I needed to use the self threading machine screw to screw it into one of the holes in the bottom of the ice maker. It wasn’t hard but I wanted to make sure I didn’t put it in the wrong spot and wind up damaging the ice maker.I didn’t realize that I would need to…
It works … but not well or consistently. Install was easy enough – maybe 30 minutes – but it’s not working as well as it should. Plenty of water pressure (95psi) and solid copper 1/4 inch line to the valve. Valve and line to ice maker flushed prior to install as well. After 4 days of trouble shooting have zeroed in on a very picky water vale. Does not cycle consistently. Resistance on valve tests within range (270 ohms) but everything leads me back to a bad valve. It happens and it’s impossible to tell sometimes without replacing it…