Broan 639 Wall Cap for 3-1/4″ x 10″ Duct for Range Hoods and Bath Ventilation Fans
Maximize the air and sound performance of your Broan ventilation fan or range hood using one of our wide variety of ducting accessories.
Product Features
Overall sizing is 12-3/4″ wide x 5-5/8″ high. Duct fitting protrudes 4-7/8″ from back of cap to allow proper fit to the ductwork (NOT for use with dryer venting)
Equipped with a spring-loaded backdraft damper and bird screen to keep nests and small animals on the outside
Wall cap is made of 24 gauge CRCQ steel construction with a black electrically-bonded epoxy finish for durability and long life
This worked well to vent a new over the range microwave to the outside. The horizontal dimension of the duct on this is actually about 10.25 inches so that when it mates with a standard 3×10 duct from the inside there is a gap which I caulked with high temp silicone to prevent air leakage. However, the extra .25 inch makes it easier to place the cap duct over the interior duct. One of the “big box” stores had a similar heavy duty cap which had a longer duct which might work better for…
6 Pcs Gas Stove Burner Covers + 2 Pcs Silicone Kitchen Stove Counter Gap Cover,MSDADA Gas Range Protectors For Kitchen 0.2mm Double Thickness Reusable, with FDA Approved and Dishwasher Safe
Frigidaire FGMC2766UF 27 Inch Gallery Series Electric Microwave Wall Oven/Microwave Combination with True Convection Effortless Temperature Probe and Steam Clean in Stainless Steel
Winflo 36″ Wall Mount Stainless Steel/Arched Tempered Glass Convertible Kitchen Range Hood with 450 CFM Air Flow, Touch Control, Aluminum Filter and LED Lights
AKDY Island Mount Range Hood -30″ Stainless-Steel Hood Fan for Kitchen – 3-Speed Professional Quiet Motor – Premium Push Control Panel – Minimalist Design – Mesh Filter & LED Lamp
Golden Vantage Wall Mount Range Hood -30″ Stainless-Steel & Glass Hood Fan for Kitchen – 3-Speed Quiet Motor – Push Control Panel – Curve Modern Design – Baffle Filter & LED Lamps – Tempered Glass
Loading...
This worked well to vent a new over the range microwave to the outside. The horizontal dimension of the duct on this is actually about 10.25 inches so that when it mates with a standard 3×10 duct from the inside there is a gap which I caulked with high temp silicone to prevent air leakage. However, the extra .25 inch makes it easier to place the cap duct over the interior duct. One of the “big box” stores had a similar heavy duty cap which had a longer duct which might work better for…