The Frigidaire IM115 Next Generation Ice-Maker Kit is designed for Frigidaire top-freezer refrigerator models built in 2003 to present with the condenser coil on the back of the refrigerator. This kit allows you to add ice-making capabilities to all freezers that accept an icemaker. It will also fit selected side-by-side refrigerators that do not have a water dispenser in the freezer door.
Product Features
Make cubes of ice directly from your freezer
Use with Frigidaire models that were built in 2003 to present
Fits top mount refrigerators and side-by-side refrigerators without freezer-door water dispenser
Compatible with 14.5 through 18.6/20.8 cu. ft. refrigerators
Works with Sears/Kenmoor After some research it appeared this unit works with the Sear 253 model series. All the refrigerator connectors, plugs, and throughholes and screw holes are as described and fit exactly this ice maker. The instructions were reasonably detailed and accurate and it took about 1 hour to install. It comes with all the parts needed to mount to the refrigerator but does not come with the kit to connect to the cold water tap. There is a small bracket with a slotted hole to adjust the level of the…
Easy install, need to buy kit to attach to water supply I’m thrilled I finally bought this ice maker and can’t believe it took me a decade to do so. Installation was easy. Hardest part was deciphering exactly where the leveling screw went. I finally decided, correctly, that I needed to use the self threading machine screw to screw it into one of the holes in the bottom of the ice maker. It wasn’t hard but I wanted to make sure I didn’t put it in the wrong spot and wind up damaging the ice maker.I didn’t realize that I would need to…
It works … but not well or consistently. Install was easy enough – maybe 30 minutes – but it’s not working as well as it should. Plenty of water pressure (95psi) and solid copper 1/4 inch line to the valve. Valve and line to ice maker flushed prior to install as well. After 4 days of trouble shooting have zeroed in on a very picky water vale. Does not cycle consistently. Resistance on valve tests within range (270 ohms) but everything leads me back to a bad valve. It happens and it’s impossible to tell sometimes without replacing it…
Single Serve Coffee Maker, HAMSWAN K Cup Coffee Maker Ground Coffee and Coffee Capsules 2 in 1 Coffee Machine Automatic Cleaning Quick Brewing Coffee Pot (Black)
ZACK NJ
Practical,small factor and affordable! Wanted to move from the classic type coffee maker int...
Bomach Ice Cube Maker Genie,Revolutionary Space Saving Ice Ball Maker Bucket Party Drink Tub Silicone Trays Mold Kitchen Tools for Chilling Burbon Whiskey,Cocktail,Beverages and More
Carla S. Lowe
We had ice. We drink lots of water and enjoy ice in it.
Tonha Space Saving Round Ice Cube Maker and Ice Bucket | Revolutionary System Saves Freezer Space | BPA Free and Food Grade Silicone Ice Mold and Storage Container with Air Tight Lid
W10295370A Water Filter, Replacement for Whirlpool Water Filter, Refrigerator Water Filter 1, EDR1RXD1, P4RFWB, Kenmore 46-9081, Kenmore 46-9930, by MT PURITY (Pack of 1)
Loading...
Works with Sears/Kenmoor After some research it appeared this unit works with the Sear 253 model series. All the refrigerator connectors, plugs, and throughholes and screw holes are as described and fit exactly this ice maker. The instructions were reasonably detailed and accurate and it took about 1 hour to install. It comes with all the parts needed to mount to the refrigerator but does not come with the kit to connect to the cold water tap. There is a small bracket with a slotted hole to adjust the level of the…
Easy install, need to buy kit to attach to water supply I’m thrilled I finally bought this ice maker and can’t believe it took me a decade to do so. Installation was easy. Hardest part was deciphering exactly where the leveling screw went. I finally decided, correctly, that I needed to use the self threading machine screw to screw it into one of the holes in the bottom of the ice maker. It wasn’t hard but I wanted to make sure I didn’t put it in the wrong spot and wind up damaging the ice maker.I didn’t realize that I would need to…
It works … but not well or consistently. Install was easy enough – maybe 30 minutes – but it’s not working as well as it should. Plenty of water pressure (95psi) and solid copper 1/4 inch line to the valve. Valve and line to ice maker flushed prior to install as well. After 4 days of trouble shooting have zeroed in on a very picky water vale. Does not cycle consistently. Resistance on valve tests within range (270 ohms) but everything leads me back to a bad valve. It happens and it’s impossible to tell sometimes without replacing it…