Broan 639 Wall Cap for 3-1/4″ x 10″ Duct for Range Hoods and Bath Ventilation Fans
Maximize the air and sound performance of your Broan ventilation fan or range hood using one of our wide variety of ducting accessories.
Product Features
Overall sizing is 12-3/4″ wide x 5-5/8″ high. Duct fitting protrudes 4-7/8″ from back of cap to allow proper fit to the ductwork (NOT for use with dryer venting)
Equipped with a spring-loaded backdraft damper and bird screen to keep nests and small animals on the outside
Wall cap is made of 24 gauge CRCQ steel construction with a black electrically-bonded epoxy finish for durability and long life
This worked well to vent a new over the range microwave to the outside. The horizontal dimension of the duct on this is actually about 10.25 inches so that when it mates with a standard 3×10 duct from the inside there is a gap which I caulked with high temp silicone to prevent air leakage. However, the extra .25 inch makes it easier to place the cap duct over the interior duct. One of the “big box” stores had a similar heavy duty cap which had a longer duct which might work better for…
AKDY Island Mount Range Hood -36″ Stainless-Steel Hood Fan for Kitchen – 3-Speed Professional Quiet Motor – Premium Push Control Panel – Minimalist Design – Mesh Filter & LED Lamp – Tempered Glass
EKON NAIS02-36″ Island Mount Kitchen Range Hood / 2 Pcs 4 Speeds Touch Control LCD Display With Remote / 4 Pcs 3W Led Lamp /900 CFM / 3 Pcs Baffle Filter (T shape island range hood)
Aluminum Foil Square Stove Burner Covers Disposable Bib Liners Drip Pans Kitchen Gas Range Top Protectors 8.5 x 8.5″ Inch(Pack of 50) (50 Packs Square)
AKDY Wall Mount Range Hood -30″ Embossed Copper Hood Fan for Kitchen – 4-Speed Professional Quiet Motor – Premium Touch Control Panel – Elegant Vine Design – Baffle Filter & Halogen Lamp
Robanku 30″ Under Cabinet Range Hood, 860FCM Stainless Steel Wall-Mounted Kitchen Range Hood Vent Cooking Fan with dual lamp and Soft Touch Control (Black)
Loading...
This worked well to vent a new over the range microwave to the outside. The horizontal dimension of the duct on this is actually about 10.25 inches so that when it mates with a standard 3×10 duct from the inside there is a gap which I caulked with high temp silicone to prevent air leakage. However, the extra .25 inch makes it easier to place the cap duct over the interior duct. One of the “big box” stores had a similar heavy duty cap which had a longer duct which might work better for…