Broan 639 Wall Cap for 3-1/4″ x 10″ Duct for Range Hoods and Bath Ventilation Fans
Maximize the air and sound performance of your Broan ventilation fan or range hood using one of our wide variety of ducting accessories.
Product Features
Overall sizing is 12-3/4″ wide x 5-5/8″ high. Duct fitting protrudes 4-7/8″ from back of cap to allow proper fit to the ductwork (NOT for use with dryer venting)
Equipped with a spring-loaded backdraft damper and bird screen to keep nests and small animals on the outside
Wall cap is made of 24 gauge CRCQ steel construction with a black electrically-bonded epoxy finish for durability and long life
This worked well to vent a new over the range microwave to the outside. The horizontal dimension of the duct on this is actually about 10.25 inches so that when it mates with a standard 3×10 duct from the inside there is a gap which I caulked with high temp silicone to prevent air leakage. However, the extra .25 inch makes it easier to place the cap duct over the interior duct. One of the “big box” stores had a similar heavy duty cap which had a longer duct which might work better for…
Chef Range Hood R100 30” Built-In/Recessed Kitchen Extractor | Compact Design with Stainless Steel | 3-Speed Setting with 700 CFM, Energy Saving LED Lamp and Dishwasher-Safe Baffle Filter| 6″ Duct
2 Pack 8273103 Gas Range Top Surface Burner Control Knob Black Replacement Part for Whirlpool Roper Estate Amana Replace # AP6012363 WP8273103 AP3085376 PS393678 ER8273103 PS11745570 WP8273103VP
Cosmo GRP304 Gas Range with 4 Sealed Burner Rangetop, Single Convection Oven w/Light Heavy-Duty Metal Stove Heat Control & Cast Iron Grate | Free-Standing/Slide-In, 30-in, Stainless Steel
AKDY Wall Mount Range Hood -30″ Embossed Copper Hood Fan for Kitchen – 3-Speed Professional Quiet Motor – Premium Push Control Panel – Elegant Vine Design – Baffle Filter & Halogen Lamp
Thor Kitchen Silver 30” Pro-Style Gas Range Cooktop Rangetop Gas Stove Top Cookerwith 4 Burners and Light Up Control Knob – 2-Years-Warranty – Stainless Steel
Loading...
This worked well to vent a new over the range microwave to the outside. The horizontal dimension of the duct on this is actually about 10.25 inches so that when it mates with a standard 3×10 duct from the inside there is a gap which I caulked with high temp silicone to prevent air leakage. However, the extra .25 inch makes it easier to place the cap duct over the interior duct. One of the “big box” stores had a similar heavy duty cap which had a longer duct which might work better for…