Broan 639 Wall Cap for 3-1/4″ x 10″ Duct for Range Hoods and Bath Ventilation Fans
Maximize the air and sound performance of your Broan ventilation fan or range hood using one of our wide variety of ducting accessories.
Product Features
Overall sizing is 12-3/4″ wide x 5-5/8″ high. Duct fitting protrudes 4-7/8″ from back of cap to allow proper fit to the ductwork (NOT for use with dryer venting)
Equipped with a spring-loaded backdraft damper and bird screen to keep nests and small animals on the outside
Wall cap is made of 24 gauge CRCQ steel construction with a black electrically-bonded epoxy finish for durability and long life
This worked well to vent a new over the range microwave to the outside. The horizontal dimension of the duct on this is actually about 10.25 inches so that when it mates with a standard 3×10 duct from the inside there is a gap which I caulked with high temp silicone to prevent air leakage. However, the extra .25 inch makes it easier to place the cap duct over the interior duct. One of the “big box” stores had a similar heavy duty cap which had a longer duct which might work better for…
Gas Stove Burner Covers,MSDADA Gas Range Protectors For Kitchen 0.2mm Double Thickness Reusable, Non-Stick,with FDA Approved and Dishwasher Safe, 10.6”X10.6”(10 Packs)
Thor Kitchen 36″ Stainless Steel Gas Rangetop Gas Stove Top Cooker with with 6 Sealed Burners and Light Up Control Knob- HRT3618U (Sliver Gas Range Top)
Thor Kitchen 36″ Stainless Steel Gas Rangetop Gas Stove Top Cooker with with 6 Sealed Burners and Light Up Control Knob- HRT3618U (Gas Range Top with LP Conversion Kits)
Best bang for your buck 5 stars for the initial review. Longevity is important for applianc...
Liquid Bearings, the superior 100%-synthetic oil for dehumidifier fans or any fans, frees sticky or rusty mechanisms, quiets noisy fans, never becomes gummy, the BEST for electric fans of all types!
Loading...
This worked well to vent a new over the range microwave to the outside. The horizontal dimension of the duct on this is actually about 10.25 inches so that when it mates with a standard 3×10 duct from the inside there is a gap which I caulked with high temp silicone to prevent air leakage. However, the extra .25 inch makes it easier to place the cap duct over the interior duct. One of the “big box” stores had a similar heavy duty cap which had a longer duct which might work better for…