GE 3/4 HP Batch Feed Garbage Disposer Non-Corded
Batch feed food waste disposers operate by loading them with a batch of waste and then using the stopper to activate the blades to start grinding. These are ideal for someone who is remodeling a kitchen or wants to add a disposer, but isn’t set up with a pre-existing wall switch. This model has a high RPM and high torque, to grind food finer and faster. Since select GE Disposal disposers can reach speeds of over 3500 RPM, while many brands can’t reach over 2000 RPM, the Disposall disposers are less likely to jam. And, stainless-steel dual-swivel grinder blades means they’re less likely to corrode, even after years of use. The Disposall offers a faster and finer grind right from the beginning. Now you can be free from the anti-jam key and able to power through food the first time, so you don’t waste time. Installation made E-Z. E-Z Mount System makes installation a breeze for anyone. We have fewer parts and steps than most of our competitors’ installation systems. The five-step installation starts by attaching a sink flange assembly. Then, the disposer snaps onto the sink flange under your sink, allowing water and waste to safely travel down the pipes. And, the Disposall easily attaches to your existing plumbing and wiring. After a quick installation, you can trust that your Disposall was made with stainless steel and corrosion-resistant materials for maximum lifespan and durability. Drain boost technology helps keep your drain free and clear of food waste to ensure your water runs smoothly in the right direction. The Disposall has an angled fin which pumps water and ground food through pipes with higher speed and pressure to keep drains purged and help reduce clogs. All our models operate quietly and some even offer sound reduction technology. The sound reduction package includes a fully insulated sound shell, so our disposers can handle your toughest challenges while minimizing noise.
Super-capacity batch-feed food-waste disposal with 3/4-HP motor. view larger
3/4-Horsepower Batch-Feed Food-Waste Disposal
Helps Take Care of the Dirty Work
Send food waste down the drain once and for all with this super-cacity GFB760V garbage disposal by GE. The disposal’s powerful grinding action reduces food waste to small particles, making the unit safe for any properly sized septic system.
Even more, the food-waste disposal features sound-reduction technology that helps ensure quiet operation, making it possible to maintain the cheerful, festive mood of a successful dinner party even during cleanup. Hardworking, quiet, and easy to install–the GE disposal makes a useful addition to any busy kitchen.
Easy-to-Use Batch Feed
To operate, remove the sink stopper, turn on a medium flow of cold water, and scrape in the food waste. Insert the stopper to start the disposal. One of the two small slots in the stopper base must line up with the switch plunger inside the neck of the disposal. Push down firmly to start, and voila–the disposal takes care of the rest. Be sure to run the disposal run for 25 seconds after the shredding and grinding stops to ensure all waste is thoroughly flushed through the trap and drain. To shut the disposal off, simply lift the stopper.
The stopper can also be used to fill the sink with water–just insert so that the largest slot lines up with the switch plunger. Then push the stopper down to seal the sink without starting the disposal. Line up the medium-sized slot to allow water to drain, but without allowing tableware and other items to drop down into the disposal.
The food-waste disposal measures 8-1/2 inches in diameter by 16-5/8 inches high. Detailed installation instructions come included.
GFB760V At a Glance: 3/4-horsepower motor Super-capacity batch-feed disposer Over 2700 RPMs grinding action* Stainless-steel jam-resistant, dual-swivel impellers EZ mount installation Direct wire power connection Sound-reduction technology Cold-rolled carbon-steel armature shaft material Sink stopper Manual reset overload protector Dishwasher drain connector Stainless-steel sink flange Stainless-steel turntable 2-level precutter
* Based on RPM testing of cleared GE and competitive models
- Heavy duty 3/4 horsepower permanent magnet motor, with over 3100 RPM grinding action (based on RPM testing of cleared GE and competitive models)
- EZ Mount installation with removable splash guard and stopper included
- Super capacity with stainless turntable
- DrainBoost technology, sound reduction technology
- Stainless steel, dual-swivel, anti-jam grinding blades