Motor Coupling Replacement Part for 285753A – Works with Whirlpool Washer – Metal Reinforced Core By DR Quality Parts
Motor Coupling Replacement Part for 285753A Whirlpool Washer. This replacement motor coupling kit is for direct drive washing machines. The coupler is located between the motor and the transmission; it is only used on direct drive washers with no belt.
Replaces part numbers 285753A 285753, 1195967, 280152, 285140, 285743, 3352470, 3363664, 3364002, 3364003, 62672, 62693, 661560, 80008, 8559748, AH1485646, EA1485646, PS1485646.
Works with most top name brands: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Crosley, Amana, Maytag, Admiral, Magic Chef.
Fixes the following symptoms:
• Pumps but will not spin.
• Will not agitate.
• Noisy.
• Spins slowly.
• Will not drain.
• Burning smell.
• Will Not Start.
• Shakes and moves.
• Leaking.
Lifetime warranty – Get your washer working again right away Click ‘Add to Cart’ now!
The Whirlpool® brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool® brand name or model designation for this product is made solely for purposes of demonstrating compatibility.
Product Features
- Replaces all previous motor coupler styles and versions including 285753A
- High quality aftermarket premium replacement part with improved metal core
- Easy Installation – Exact Fit for most motor coupler styles and versions of Whirlpool & Kenmore washer
- Lifetime Warranty – For any reason not satisfied replacement or full refund
- SAVE TIME and MONEY – Inexpensive way to fix and make your washer spinning again
Loading...
![[Upgraded] KOIOS Juicing Machine, 2020 Masticating Slow Juicer Extractor, Cold Press Juicer with ...](https://www.appliancebee.com/wp-content/uploads/2020/03/418KMxqWkyL-250x250.jpg)
works for my Kenmore The package contains as per ordered a Whirlpool washer motor couple, but purchased it for my Kenmore heavy-duty 80 series washer.Installed and it is working fine.Was a tight fit, so I took special care tapping it in place evenly; otherwise, I have given it a 5 star rating.Special note:(1) considering that the device acts like a “fuse” to protect the washer’s motor from too heavy a load, I am not certain about its sizing; for example, it may not support a…
Thumbs up I already had the original broken coupling out and both the transmission and motor shafts cleaned up. I tried both halves of the new coupling on both shaft ends and in either case I could only get either one on about .125 even with light tapping. I did not want get the couplings stuck on the shafts so I pried them off. There were drag marks on the flats so I set to work with a small fine cut file. File a little off both sides of the flat, test fit, file again, test fit again, etc. until I had a…
It seems like I was the unlucky one but I bought this after my original part broke on my Kenmore 90 Series Washer, after working for 15 years. As others have stated, it was a very, very tight fit but I was able to get it on with light taps of a rubber mallet. But, it only lasted for a few weeks & the washer quit spinning. So I tilted it up & there were pieces of the new coupler all over the underneath of the washer. Maybe with tapping it on due to the tightness could have been the…