Microvisorhood – a mini hood extension for your microwave over the range – “STAINLESS STEEL”
Microvisor is a state of the art mini hood designed to attach to a “microwave over the range” and improve the exhaust function of the microwave. It was developed by an accomplished chef who was a successful owner operator of three restaurants in New Jersey for 25 years.The Microwave Over Range was designed to incorporate an exhaust system in existing cabinet space, in place of a more expensive exhaust hood. The Microwave Over Range is normally 15″ deep, and all cooktops/ranges are a minimum of 24″ deep, it is virtually impossible to effectively exhaust the fumes from cooking on the front burners. The Microvisor mini hood is 29 7/8″ wide, 1′ high at the front and 1 1/2″high at the back. 8 1/2″ deep. When inserted into the bracket it projects forward of the microwave oven by 6 1/2″ to capture the smoke, grease and odors. The bracket is a 2″ deep patented C clip design that attaches in less than 3 minutes. The Microvisor mini hood is inserted into the bracket and removed by simply pulling it out. After 2 years of design and manufacturing prototypes, the Microvisor has been perfected and refined to its present form. It has been proven to capture 70% of the cooking fumes and odors produced while cooking on the front burners of a cooktop or stove. It prevents the smoke, grease and odors from mixing with the air in your home and accumulating on furniture and cabinets. It has been proven that fumes from cooking oils escaping into the air of your home are harmful to your health. Everyone who has a Microvisor microwave range hood in their home says it enhances and completes the look of their microwave over the range. The Microvisor Hood is removable, easy to store, & no electrical components. ***Disclaimer – Some images show Microvisor with branding on the corner. At the request of our customers we have removed this branding.*** Microwaves with a convex or non-flush bottom may require the 5/8″ nylon spacer kit.
Product Features
- The Microvisor is a mini hood that attaches to the underside of a “microwave over the range” and extends forward over the cook top to capture smoke, grease, and moisture
- Captures the smoke, grease and moisture not captured by the exhaust system under the microwave oven
- Captures the fumes and odors produced from cooking that are damaging the air quality in your home
- The Microvisor compliments the appearance of your microwave and perfects the exhaust function reducing grease residue buildup on cabinets, microwave ovens and your ceiling
- ****Stainless Steel Finish****
I want to start off by saying, this thing really works and I’m extremely happy with it. If you’re like me, the front burners on your stove are the easiest to reach, but are also the ones that fill your house with smoke and set off the smoke alarms. I don’t believe there’s a microwave fan on the market that can suck up so much air it will grab the smoke off the front burners without a physical barrier. If it does exist, I’m certain it’s as loud as a jet engine.This hood fit right…
Well, today I fried up some bacon AND deglazed a dutch oven of sauteed onions at the same time and the smoke alarm didn’t go off. All right. I’m surprised. Since our smoke alarm has been triggered by the steam of a microwaved egg, I am impressed. This is my impressed face.I’m not sure it’s worth $90. Maybe $50. But it does the job, and it’s better than $400 for a new microwave with an expandable hood.Note: the instructions say that microwaves will either have 4 screws or 3 screws…