Basic as it was built – IT WORKS VERY WELL First off I have to laugh at all the negative comments…Obviously these people have little to no comprehension of how things are supposed to “help” correct your current issues NOT necessarily “solve” them right out of the box.Here are the YES things you should expect:1) Yes you will need to do a little measuring and adjusting to find the correct spread of the periscope and alignment. IN FACT YOU MAY NEED TO DO IT MULTIPLE TIMES before you find the right fit…
A good solution that takes some prep time to make work. Buy foil tape. I bought a replacement dryer and the vent did not line up with the existing exhaust. It was over by about 3 and 3/4 inches and up by about 1 and 1/2 inches. A vent hose would have put the dryer out about a foot, and the foil type of flexible hose kinked up and would have been a serious fire hazard. This was just what I needed. Because it is adjustable, it is not ready to go right out of the package. You do have to carefully measure, test, remeasure and test before you can seal up the edges with…
Hauslane | Chef Series 30″ WM-590 | Black Stainless Steel Fingerprint and Smudge Resistant | 3 Speed Wall – Mount Kitchen Fan | 860 CFM, Easy Clean Baffle Filters, LED | Duct or Ductless Options
Everything needed was in the bag! With this kit we replaced all the wheels and bearings alon...
NEW W10619844 Latch, Lid Lock Compatible for Whirlpool Washer made by OEM Manuafcturer, W10059230, 8563937, PS11756782, WPW10619844VP, AP6023438 by Primeco – 1 YEAR WARRANTY
Jeacent Portable Air Conditioner Window Seal Plates Kit, Plastic AC Vent Kit for Sliding Glass Doors and Windows, Adjustable Length Panels for Exhaust Hose of 6″ Diameter
Good price and quality. Medium difficulty install. Moderately difficult to install this base...
30 inch Under Cabinet Range Hood, CIARRA 450 CFM Stainless Steel Kitchen Stove Hood with 3 Speed Exhaust Fan, Dishwasher-Safe Permanent Filter, Push Button Control
Loading...
Basic as it was built – IT WORKS VERY WELL First off I have to laugh at all the negative comments…Obviously these people have little to no comprehension of how things are supposed to “help” correct your current issues NOT necessarily “solve” them right out of the box.Here are the YES things you should expect:1) Yes you will need to do a little measuring and adjusting to find the correct spread of the periscope and alignment. IN FACT YOU MAY NEED TO DO IT MULTIPLE TIMES before you find the right fit…
A good solution that takes some prep time to make work. Buy foil tape. I bought a replacement dryer and the vent did not line up with the existing exhaust. It was over by about 3 and 3/4 inches and up by about 1 and 1/2 inches. A vent hose would have put the dryer out about a foot, and the foil type of flexible hose kinked up and would have been a serious fire hazard. This was just what I needed. Because it is adjustable, it is not ready to go right out of the package. You do have to carefully measure, test, remeasure and test before you can seal up the edges with…