FEND Refrigerator Water Filter Replacement for Whirlpool Everydrop 9081,9930,2-pack

Filter Specifications

Flow Rate: 0.5 GPM(1.9LPM)

Micron Rate: 0.5 Microns

Pressure: 30-125PSI (207-862KPA)

Temperature: 33 oF(0.6℃) – 100oF(38℃)

Filter life: 6 Months or 200 Gallons

Installation Instruction:

1.Shut off water source

2.Remove the existing filter by turning i left,and then take it out

3.Remove the cap of a new filter,insert it into refrigerator and turn right to lock it in place

4.Recover the water source,and check it there is leakage

5.Run the working prcess for 4 minutes(about 8 cups of water )for purge6 reset replacement indicator light by pressing the ICE TYPE button and the CHILD LOCK(or MOISTURE CONTROL)button simultaneously for 3 seconds

Product Features

• Compatible with: Refrigerator Water Filter1 Compatible with ,KENMORE469930, 9930, 9081, Filter1
• Easy to Install – No special tools required. Just insert water line into built-in plugs eliminating the risk of leaks.
• Designed for fit these leading refrigerator brands: Whirl-pool, Kenmore, MAYTAG, KitchenAid, Jenn-Air, Amana, PUR Filter, Used in side-by-side, top freezer and bottom freezer refrigerators which accept Filter1,
• Rigorous process design ensures flow rate is smooth without leakage. To protect you from unwanted chemicals and particles, Flush 4 to 5 gallons of water through cartridge before using.
• 100% Satisfaction & Guarantee — If you are not completely satisfied with your purchase, please contact us and refund for 3 months.